Systime Support

• Refer Main EPC Manual https://learnsystime.auxosoftware.com/en/support/solutions/articles/51000456591-microcat-infomedia-epc-integration
• Login to Microcat
• https://login.superservice.com/
• Download / Install the DMSi application
   
• 

• DMSI Client configuration

• After the DMSI is installed follow the below steps to configure it :
   
• Start the DMSi Application from the Start / Programs / App menu
  
  

•     From the system tray (Down by the clock)  Right click on the DMSi icon:
  
  

• Select “Settings” option.

• Select Add New.

• Select Microcat Correct Manufacturer
• Select Add New

• Select option – “Listen for TCP/IP connections from an MMP server.” 

• Set the options as below:
  IMPORTANT TO SELECT THE SAME OPTION BELOW
  
   If required change the Port from the default of 1997

  This is useful if you had a PC that uses Hyundai & Nissan Microcat, so you could run them on different port numbers.
  
   
   
          
           
   

  Within the integration setting parameter screen there is an option – “Customise Version” 
   
  
  • The default values must be as below: 

 
Select Format Fields

Tick the box and select Dash (Hyundai NZ Only)


 
Click OK
 
In the case of Nissan & Other franchises leave the default – they don’t have a delimiter
 This should be set

If this step is not performed the parts will come through to Autoline without the hyphens (dash) in them causing Autoline to not recognise the Part in the Stock or Price file.

Complete the setup and enter a Name of your choice.



Login on the DMSi

From the system tray (Down by the clock)  Right click on the DMSi icon:

 

 Enter your Username & Password
Click Save login details

The small dot on the icon should change from red to green